Commercial Radiant Cooktop RR-1234R INSTRUCTION MANUAL Thank you for your purchase. Please read thoroughly before initial use and keep in a safe place for future reference.
IMPORTANT SAFEGUARDS Read all instructions. When the Warming indicator is on, this means the ceramic plate is extremely hot, DO NOT TOUCH. To protect against electrical shock, do not immerse cord or appliance in water or any other liquid. Close supervision is necessary when any appliance is used by or near children. Unplug from outlet when not in use and before cleaning.
CAUTION: When the Warning indicator is on, the ceramic plate is CONTROL PANEL extremely hot – DO NOT TOUCH. LED Display INSTALLATION • • Timer setting buttons Timer button ON/OFF button Control knob OPERATION 1.Plug power cord to power source and place cookware centered on cooktop. (Once power is connected, the POWER indicator will illuminate and then in standby mode.). 2.
KEY POINTS When the Warming indicator is on, this means the ceramic plate is extremely hot, DO NOT TOUCH. SELECTING THE PROPER COOKWARE This radiant cooktop is not selective with cookware. However, cookware with a flat bottom and matte finish will have the best heat Cooker will automatically shut-off after 2 hours of inactivity (when not set on timer). Place cooktop on flat surface, but keep a clearance of 4 inches all around for proper ventilation.
TROUBLESHOOTING / ERROR CODES PROBLEM CHECK POINTS Unit is plugged in but Is cooktop firmly plugged into a correct outlet? power indicator does Was there a power shortage? not come on Power indicator is lit Please contact Sunpentown but not heating Check if temperature sensor overheated, if fan Error code: E5 is running;or if air outlet or inlet is blocked. Temperature sensor open circuit, please Error code: E6 contact Sunpentown.
