Micro-Computer Radiant Cooktop RR-9215 INSTRUCTION MANUAL Thank you for your purchase. Please read thoroughly before initial use and keep in a safe place for future reference.
IMPORTANT SAFEGUARDS Read all instructions. Do not touch hot surfaces To protect against electrical shock, do not immerse cord or appliance INDEX in water or any other liquid. Close supervision is necessary when any appliance is used by or near children. Unplug from outlet when not in use and before cleaning. Do not operate any appliance with a damaged cord or plug; or after the appliance malfunctions or has been damaged in any way.
OPERATION STRUCTURE DESCRIPTION & FUNCTION 8 power levels (wattage): 100, 300, 500, 700, 900, 1100, 1300, 1500. 1. Plug power cord to power source and place cookware centered on cooktop. (Once power is connected, the LOCK button will illuminate). 2. To turn on, press LOCK followed by ON/OFF button. If ON/OFF is not pressed within 30 seconds, unit will return to locked mode. 3.
KEY POINTS SELECTING THE PROPER COOKWARE When the Warming indicator is on, this means the ceramic plate is extremely hot, DO NOT TOUCH. Cooker will automatically shut-off after 2 hours of inactivity (when not set on timer). Place cooktop on flat surface, but keep a clearance of 4 inches all around for proper ventilation. If air inlet or outlet is blocked, the internal temperature will rise and cause unit to overheat and shutoff during cooking. Never power on unit without cookware.
TROUBLESHOOTING / ERROR CODES PROBLEM Unit is plugged in but power indicator does not come on Power indicator is lit but not heating CHECK POINTS Is cooktop firmly plugged into a correct outlet? Was there a power shortage? Please contact Sunpentown Error code: E2 Unstable voltage detected, please wait until voltage returns to normal. Error code: E4 Blown fuse, please contact Sunpentown. Error code: E5 Unit suddenly stops heating during normal operation Internal temperature is too high.
