Use and Care Manual

16
Screw the faucet adapter onto (or into) the faucet tap. Check for leaks (use Teflon tape to eliminate if
necessary).
Connect the six-sided connection of the drain hose to the drain port connection on the back of the
dishwasher cabinet. Do not over-tighten (to avoid damage to threads).
Connect the star-shaped connection of the inlet hose to the inlet port on the back of the dishwasher
cabinet. Do not over-tighten (to avoid damage to threads).
Connect the circular connection of the drain hose onto the longer (bottom) male connection on the quick
connect.
Connect the circular connection of the inlet hose onto the shorter (top) male connection on the quick
connect.
Attach the quick connect onto the faucet adapter, by pulling down the outer locking collar on the quick
connect, while pushing th e quick connect upward onto the faucet adapter.
When the quick connect snaps onto the faucet adapter, release the locking collar. Verify the connection
is secure.
Slowly open the hot water line and check for any sign of water leaks at all hose connections. If leaks are
located, immediate ly close the water supply and repair the hose connections.
1
2.
3.
4.
5.
6.
7.
8.
．
Important
WARNING
1 . Once y ou o p en the w at e r s upp ly li ne , ( eve n if it is cl ose d imm e diat el y t her e af ter ) , th e i n le t h o se wil l b e
pressurized.
2 . To r el i ev e water p r essu r e f rom in sid e t he inl et hos e , (m a ke sure t he w ater l in e (f a u cet) i s cl os ed ): p r es s
and hold the red pre ssure relief button on the quick connect until the flo w of water stops.
Sh ut o ff t he wa te r s upp l y a t th e f a uc et .
Disconnect the power supply cord
NOTE:
Hard water conditions will adversely affect the washing performa nce of your dishwasher. Hard
water conditions w ill also cont ribute to 'lime' (w hite film substance) deposits and/or 'scaling' o n the
stainles s steel surface of the dishwasher tub and heater element, located in the sump undernea th
th e r em ov abl e f ilter s cre e n. To ass is t i n m i ni mizi ng th e s e co nd it io n s, i t is re c om me nd ed t o
periodically o perat e/rins e the i nside of the dishwa sher (empty) us ing 1 cup of white vineg ar at least
once a week.
1.
2.
Disconnecting your Dishwasher
FAILURE TO RELIE V E WATER P RES S URE, B EFO R E D I SCON NE CT ING T H E Q UI CK- CON N ECT
FROM THE FA UCET, WILL RESULT IN BAC K-PRESSURE OVE R-SP RAY. THE TEMPERATURE OF
INCOM INGWAT ER C AN B E VERY HO T, AND B ACK -PRESSURE O VE R-S PR AY COUL D CAU SE
S EV ER E BUR NS AN D /OR SCAL D ING .
DO NOT LET CHILDREN DISCONNECTTHE DISHWASHER; CLOSE SUPERVISION OF CHILDRENIS
A LWAYS I MP O RTA NT ARO UND A PPL I ANC ES.
DANGER
The following things should be checked before starting the dishwasher.
1 The dishwasher is level and fixed properly
2 T he inl et va lve i s o pen
3 There is a leakage at the connections of the conducts
4
The wires are tightly connected
5 The power is switched on
6
The i nlet an d dr ain ho ses a re knott ed
7
All packing materials and printings should be taken out from the dishwasher
Th e c on te n t of t h i s m a nu al i s ve ry he l pfu l to t he user s .
Afte r ins tallati on, please mak e sure to kee p this manual.