MINI DEHUMIDIFIER SD-350TI With UV Light SD-350 INSTRUCTION MANUAL Please read these instructions thoroughly and Keep it in a safe place for future reference.
BEFORE YOU USE YOUR DEHUMIDIFIER, PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY. SAFETY NOTES 1. Do not connect the unit to any damaged AC electrical socket. 2. Ensure removable covers and containers are correctly fitted before switching on the unit. 3. Always switch the unit off when not in use and before unplugging. 4. Do not use in the following locations: • Next to or near a heat source (radiator, heater, dryer, etc.) • Area where oil or water is likely to splash. • Under direct sunlight.
PARTS IDENTIFICATION Handle Model: SD-350 Filter / UV light / TiO2 mesh (SD-350Ti) Water full indicator (Red) On/Off Switch Air inlet Power indicator (Yellow/green) Water tank DC adaptor socket Water outlet plug Floater Model: SD-350Ti Water full indicator (Red) UV indicator (Orange/yellow) Power indicator (Yellow/green) Water tank sensor Water full sensor DC adaptor
OPERATION • • Make sure the unit is off before connecting power. Allow sufficient space around the unit for air circulation. 1. Connect DC adaptor to the unit, then connect to power source. 2. Turn the unit ON. Power indicator will illuminate. 3. For SD-350Ti model, UV light automatically functions when the unit is in operation. Both Power and UV indicator will illuminate. 4. When tank becomes full, the unit will auto shut off and the Full indicator (in red) will illuminate. 5.
Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge. This guarantee is subject to the following terms: • Sunpentown must be notified of the fault. • Proof of purchase must be presented to Sunpentown’s nominated representative. • The warranty will be void if the product is modified, misused or repaired by an unauthorized person.