DEHUMIDIFIER MODELS: SD-30E / SD-40E / SD-65E / SD-70E INSTRUCTION MANUAL Please read these instructions thoroughly and keep it in a safe place for future reference.
CONTENTS FUNCTIONS …………………………………………………………………………………2 SAFETY NOTES ……………………………………………………………………………2 NAME OF PARTS ………………………………………………………………………….3 CONTROL PANEL …………………………………………………………………………3 TECHNICAL SPECIFICATIONS ………………………………………………………….4 INSTALLATION …………………………………………………………………………….4 OPERATING INSTRUCTIONS ……………………………………………………………5 OPERATION …………………………………………………………………………………5 MAINTENANCE …………………………………………………………………………….6 TROUBLE SHOOTING ……………………………………………………………………..8 YOUR GUARANTEE ……………………………………………………………………….
BEFORE YOU USE YOUR DEHUMIDIFIER, PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY. FUNCTIONS 1. Prevents mold growth on clothing, cupboards, doors and drawers. 2. Prevents condensation on ceiling, walls and windows. 3. Dehumidifying is effective on moisture sensitive items like musical instruments, cameras, computers, etc. 4. Removes dampness from bookshelves and closets. SAFETY NOTES 1. 2. 3. 4. Do not connect unit to any damaged AC electrical socket.
NAME OF PARTS CONTROL PANEL 1. POWER Button: Press once to turn unit ON, unit will begin operating in dehumidifying mode at original factory setting (60%RH). Press again to turn unit OFF. 2. CONTINUOUS Button: When unit is in operation, press this button to set CONTINUOUS DEHUMIDIFYING mode. 3. TURBO Button: Press this button to set unit in high fan speed. 4. NORMAL Button: Press this button to set unit in low fan speed. 5.
FEATURES Bucket Full Light: Illuminates when bucket is ready to be emptied, or when the bucket is removed or not replaced in proper position Auto Shut-Off: The water level control switch shuts off the unit when the bucket is full, or when the bucket is removed or not replaced in proper position.
OPERATING INSTRUCTIONS Operating Conditions: This unit is designed to operate with a working environment between 41 ~ 95F. If the unit has been switched off, please wait 3 minutes before switching on again. If switched on immediately, allow 3 minutes for unit to resume correct operation. Do not connect unit to a multiple socket outlet with other electrical appliances. Select a suitable location, with easy access to an electrical outlet.
Continuous Drainage: Remove the plastic cover located at the rear of the unit. Push the drain hose into the drain hole (see image below) Remove the water tank and securely attach the drain hose to the connector (see image below) The hose should be smooth and without bends or kinks. Place the end of the hose to a suitable drainage facility. MAINTENANCE Important! Be sure to unplug the unit before cleaning.
Grille and Housing Use a soft, clean cloth to wipe the surface. Do not use water as this may cause an electrical fault or shock hazard. Air intake and outlet should be kept free of obstacles. Use a vacuum attachment or brush to clean. Water Tank Wash the tank using warm water and neutral detergent. Rinse and allow dry, replace when dry. Power Cord Wrap the cord and bundle it with a band.
TROUBLE SHOOTING BEFORE COTACTING THE MANUFACTURER, PLEASE CHECK THE FOLLOWING POSSIBILITIES. PROBLEM Unit fails to operate Performance decreased Unit is noisy Frost appears on coils Water on floor CHECK Power is OFF Power cord is unplugged or not securely fitted.
Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge. This guarantee is subject to the following terms: Sunpentown must be notified of the fault. Proof of purchase must be presented to Sunpentown’s nominated representative. The warranty will be void if the product if modified, misused or repaired by an unauthorized person.