SF-16D48BK 16 inch DC Stand Fan READ AND SAVE THESE INSTRUCTIONS Attention: Pictures are for reference only and may not be exact
IMPORTANT SAFETY INSTRUCTIONS CAUTION Read Rules for Safe Operation and Instructions Carefully. WARNING 1. Do not leave the fan running unattended. 2. Keep electrical appliances out of reach from Children or infirm persons. Do not let them use the appliances without supervision. 3.This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way.
7.WARNING—To reduce the risk of fire or electric shock, Do not use this fan with any solid-state speed control device. 8.This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from theoutlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.
INSTALLATION INSTRUCTIONS Name of components Prior to installation, please remove the spinner and plastic nut from the motor head Plastic nut Spinner Motor Install after alignment Supply cord Rear grill Pole Chassis installation: The chassis is installed by clock-wise rotating the pole.
Front grill Lock nut of blade Lock nut of blade anticlockwise, and then install the front fan cover. Blade Pull the blade to rotate after installing, so as to ensure that the blade can be normally rotated. Lock nut of grill Screw the lock nut of grill clockwise, and in the meantime, fix the rear grill. Front and Rear Guard Installation Align Catch of the Front Guard with the illustrated position of the Rear Guard. Press guards sequentially with both hands. Self-Catch Installation.
INSTRUCTIONS FOR USE Instructions for key of remote controller On/off button Oscillating button “+”key “-”key Timer button On/off button: Press it once, the fan will turn on and press it again to shut off. Oscillating button: Oscillating Function: After the fan starts, short press the button once to start oscillation. Press the button again to stop it at the desired direction. Timer button Setting a Starting Time: Plug in the unit. Press the timer button when the fan is off to activate the auto on timer.
BATTERIES INSTRUCTIONS (included) 1. Please push locking latch in the direction of Arrow A, and pull out the pull notch in the direction of Arrow B at the same time. 2. Use 1 "CR2032" lithium battery (included) 3. Insert the batteries, making sure that the positive terminals are facing the proper way. 4. Replace the cover. Battery installation Pull Notch B A B Locking latch BATTERY WARNING 1. Do not dispose of batteries in fire, batteries may explode or leak. 2. Do not mix old and new batteries. 3.
INSTRUCTIONS FOR USE Instructions for operation of body Pitching adjustment Manual Timing display Wind speed display Oscillating button Height adjustment Wind speed button Rotate anticlockwise and take down a pole (column) to adjust the height. On/off button Oscillating button: a. Oscillating Function: After the fan starts, short press the button once to start oscillation. Press the button again to stop it at the desired direction. b. Setting a Starting Time: Plug in the unit.
Wind speed button: Short press the wind speed button, and wind speed will change according to: shifts of 1-2-3-4-...-12 successively; press the wind speed button for a long time to realize quick adjustment of wind speed On/off button: Press it once, the fan will turn on and press it again to shut off. Air volume: Oscillating angle: Tilt angle: Power: 1500 CFM 85° 24° 35W USER SERVICING INSTRUCTIONS a) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
CLEANING 1. Be sure to unplug from the electrical supply source before cleaning. 2. Plastic parts should be cleaned with mild soap and a damp cloth or sponge. Thoroughly to remove soap film with clean water. 3. Be sure not to make water or other liquid enter inside of motor.