SF-16W81 16” Wall-Mount Fan Version 1.0 2015 OWNER’S MANUAL SAVE THESE INSTRUCTIONS Attention: Pictures in the IM are for reference only.
CAUTION Read Rules for Safe Operation and Instructions Carefully. WARNING 1. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to t in a polarized outlet only one way. If plug does not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied electrician. Do not attempt to defeat this safely feature. 2.
GRILL & FAN BLADE ASSEMBLY 1. Unscrew the spinner clockwise (this part may be packed separately in bag) and unscrew plastic nut counterclockwise to remove. Fix the rear grill onto the motor shaft, replace plastic nut and turn clockwise to tighten. (Fig.1) 2. Insert the blade onto shaft - make sure the rotor shaft pin is tted into the groove on the blade. Turn the spinner counterclockwise to tighten the blade. (Fig.2) 3.
“ ” SPEED KEY After the fan has started, press to change fan speed in sequence of: Low - Medium - High. The corresponding indicator will illuminate. “ ” MODE KEY Press this key to select mode (or wind type). Press to change in the sequence: NORMAL - NATURAL - SLEEP. Corresponding indicator will illuminate. The features of 3 wind types are as follows: NORMAL WIND: delivers air constantly on set speed of high, medium or low.
BATTERIES (not included) (1) Slide the battery compartment cover downwards. (2) Insert batteries as indicated by drawing. (3) Slide the battery cover back in place. NOTES: Use size “AAA” manganese or alkaline batteries. Do not use rechargeable batteries. WARNING 1. Do not dispose of batteries in re or high heat locations, batteries may explode or leak. 2. Do not mix old and new batteries. 3. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
CLEANING 1. Be sure to unplug from the electrical supply source before cleaning. 2. Plastic parts can be cleaned with mild soap and a damp cloth or sponge. Follow with clean damp towel to remove soap lm. 3. Be sure water or other liquid does not come in contact with the motor. Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge.