Instructions / Assembly

10
FUSE REPLACEMENT
a) Grasp plug to remove from the receptacle. Do not unplug by pulling on
the cord.
b) Fuse is located on the plug. Slide the fuse cover towards the blades to
open. (Fig. )
c) Remove fuse carefully. Using a tweezer, insert the tip of your tool into the fuse
slot and grasp one end. Remove the fuse gradually and slowly - do not overexert.
If it feels tight, wiggle gently to remove little by little. When one side of the fuse has
come loose, you can remove the fuse entirely. (Fig. )
d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse. (Fig. )
e) Slide close the fuse access cover. (Fig. )
f) Risk of fire. Do not replace attachment plug. It contains a safety device (fuse)
that should not be removed. Discard product if the attachment plug is damaged.
Notice:
• 1. When replacing the fuse, do not overexert or product may be damaged.
• 2. If it seems too hard to install, make sure you have got the right fuse type.
1 2 3 4
1
2
3
4