Instructions / Assembly

Clip

PART FIGURE

All the pictures in this manual are for explanation purpose only. Any discrepan-

cy between the real object and the illustration in the drawing shall be subject to

the real product.

Note:

GRILL & FAN BLADE ASSEMBLY

1. Unscrew the spinner clockwise (or take the spinner

out from the bag) and the plastic nut counterclockwise

to remove both of them. Fix the rear grill to the motor

then tighten the plastic nut again. (Fig. 1)

2. Insert the blade into shaft, and make sure the motor

shaft pin is fitted into groove of the blade. Turn the

spinner counterclockwise to tighten the blade. (Fig. 2)

3. Fasten the front grill and the rear grill by the grill clip

and then tighten the fan grill locking screw and nut.

(Fig. 3)

Fig.1

Fig.2

Fig.3