Use and Care Manual
LOW WATER ALARM*
The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the
minimum level, you will hear a beeping sound and the indicator light will ash continuously. The unit will
automatically pause evaporative cooling.
Rell the water tank to deactivate the alarm in cooling mode. First switch OFF the unit and unplug from
the power outlet. Fill the water tank with water above the minimum water level mark. Plug in and switch
ON again.
To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), press the
while water tank is still empty.
cool button to stop the water pump. The alarm will sound again if COOL function is activated
Water can be lled (1) Manually or (2) Continuously by connecting a garden hose.
* Always turn unit off and unplug from power when relling.
FILLING WATER MANUALLY
• Add water manually into the tank through the top opening.
There is a hole for water to ow into the tank.
• Do not ll above the MAX water level mark.
CONTINUOUS WATER SUPPLY CONNECTION
Connects directly to a standard garden hose for continuous water supply.
This connection eliminates the need to manually ll the water tank.
• Securely screw on the supplied Hose Connector (larger end) to the Continuous Water Inlet
located on the back of the unit. Verify that the Hose Connector is screwed on tight.
• Connect the other end of Hose Connector to your garden hose (should be 1/2”, not supplied).
• Verify connections are secure and turn on the water.