Instruction Manual Evaporative Swamp Cooler It is important that you read these instructions thoroughly before using your new air cooler and we strongly recommend that you keep them in a safe place for future reference. Model No.
CONTENTS TABLE OF CONTENTS ---------------------------------------------------- 1 A. PRODUCT INTRODUCTION --------------------------------------- 2 B. TECHNICAL PARAMETER ----------------------------------------- 2 C. CONTROL PANEL, LCD & CONSTRUCTION DIAGRAM --- 3 D. SELECTION OF FUNCTIONS -------------------------------- 4 ~ 5 E. CARE AND MAINTENANCE --------------------------------------- 5 F. CAUTIONS -------------------------------------------------------------- 6 G.
A. PRODUCT INTRODUCTION SF-613 Air cooler is our latest design with microcomputer control system. It has device for storing water and ice cubes. It can lower surrounding temperature, freshen the air with equipped anion, humidify the air through the principle of water evaporation and melting ice. LCD panel makes it luxurious and easy to use. Also equipped with double-layered, filtration mesh water curtain to remove odor and dust. This unit will provide you a comfortable and healthy environment.
C. CONTROL PANEL, LCD DISPLAY AND CONSTRUCTION DIAGRAM 1. Control panel and functions (Same with remote controller) CONTROL PANEL TIMER LCD DISPLAY COOL SPEED Sleep Mode Indicator SWING Timer Indicator MODE POWER POWER Cool Indicator Fan Speed Indicator Auto Swing Indicator 2. Construction diagram.
D. SELECTION OF FUNCTIONS 1. ON/OFF: Turns unit ON or OFF • Press once to turn ON. Following indicator lights will illuminate: POWER, IONIZER, and SPEED. Unit operates in default High fan speed. LCD panel will display rotating fan at High speed. • Press again to turn OFF. • IONIZER turns on automatically when unit is powered on. 2. FLOW: Horizontal swing of vertical louvers. • Press once to engage auto swing of louvers. FLOW indicator light will illuminate and LCD panel will display auto swing indicator.
• • • • Open the front door by the pulling gently on the handle. Add water to the tank. Do not overfill. For added cooling, add ice to the tank. (Fig. 1) Power supply should be disconnected before filling to prevent electrical parts from damage. Fig 1 E. CARE AND MAINTENANCE Always power OFF and unplug the unit before cleaning and maintenance. • Clean the housing with a damp cloth. Never spray water directly onto the housing or control panel/LCD or use harsh chemicals.
Cleaning the Dust Filter 1. Disconnect the power supply. 2. Push down on the two handles of the filter and pull outwards. (Fig 2) 3. Clean under lukewarm water and mild detergent. 4. Make sure filter is completely dry before operating unit. Cleaning the Water Curtain 1. Disconnect the power supply. 2. Remove the 3 screws located on the back frame: one in each top corner and one at bottom center. Do not remove back panel yet. 3.
2. After filling with water, do not tilt unit and avoid moving unit – which may cause water to overflow the sides of the tank and leak. If unit needs to be moved a little, push on the side gently. (Fig. 5) 3. Never turn the unit on its sides. (Fig. 6) 4. Do not place any heavy objects on top of the Air Cooler. The air outlet must not be obstructed. (Fig. 7) Fig. 8 Fig. 9 Fig. 10 Fig 11 5. Keep a minimum space of 6 inches around the unit. (Fig. 8) 6. Suitable ambient temperature range is 68~104°F.
G. PACKING LIST No.
Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge. This guarantee is subject to the following terms: • Sunpentown must be notified of the fault. • Proof of purchase must be presented to Sunpentown’s nominated representative. • The warranty will be void if the product if modified, misused or repaired by an unauthorized person.
