Use and Care Manual

Swing function
The electric heater in operation mode, press the "swing" key to open the swing
function, pressing this button to turn off the swing function; when the electric heater
stops heating function, the wind swinging function also stop.
Temperature sensor short circuit, open circuit protection function
Safety protection
AUTO energy saving function
Remote controller
Remote control
Timer button
Mode button
ON/OFF button
Temperature / Timer increase
Temperature / Timer decrease
BATTERIES INSTRUCTIONS (included)
Swing button
1. Please push locking latch in the direction of Arrow A, and pull out the pull notch in the direction
of Arrow B at the same time.
2. Use 1 "CR2032" lithium battery (included)
3. Insert the batteries, making sure that the positive terminals are facing the proper way.
4. Replace the cover.
No matter in what mode, the temperature sensor short circuit or open circuit will
cause the display to flicker “E1” or “E2” along with the buzzer ringing 10 times.
All key operations will be invalid.
When the unit senses the temperature to be above 122F, an auto shut off protec-
tion mode is initiated. The screen will display “FF” and flash 75 times once per
second. The unit can only be reactivated by powering down the entire machine
and restarting.
The AUTO function will allow the heater to determine the most energy efficient
mode of achieving the desired temperature. This will provide the most energy
savings.
The remote-control unit has the same key functions as the control panel on the
main unit.
4