Use and Care Manual

Battery installation
Locking
latch
Pull Notch
Battery installation
Locking
latch
Pull Notch
B
B
A
MAIN TECHNOLOGY SPECIFICATIONS
MODEL
LOW HIGH
POWER REGULATION RANGE (W)
SH-1515
900
1500
Power supply: AC 120V ~ 60Hz
LOW OSC
HIGH OSC
900 1500
Troubleshooting
Problem Possible Cause Solu on
A er the power is
engaged,the machine does
not work.
The plug may not be
plugged well.
Check whether the plug is
properly inserted into the
receptacle.
The machine suddenly
stops during hea
ng.
The temperature exceeds
the threshold of the
thermal cut- off.
Pull off the plug manually,
and then i
nsert it into the
receptacle again
when the
machine is cooled.
1. Do not dispose of batteries in fire, batteries may
explode or leak.
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
4. Non-rechargeable batteries are not to be recharged.
5. Batteries are to be inserted with the correct polarity.
6. Exhausted batteries are to be removed from the product.
7. The batteries must be removed from the remote controller before it is scrapped
and that they are disposed of safely.
BATTERY WARNING
Before contacting the manufacturer, the following are solutions to common
problems. However, if the solutions below do not solve the issue, it is
recommended to contact the manufacturer’s customer service for further
assistance.
5