Use and Care Manual

3
How To Use
Opening and Closing Top Lid
 To open: press down the Lid Lock with thumb and pull latch upwards. If unit was in operation, be
cautious of hot vapor that may escape.
 To close: press lid down firmly. Make sure lid is securely closed or water will not reach set
temperature and boil continuously. Make sure you hear a “click” when closing.
Removing and Replacing Top Lid
 To Remove: Lift top lid to about 45° angle, press the Release button (located at the rear of the top
cover) and remove.
 To attach: press down on the Release button and place lid in the groove. Close lid firmly
Filling & Refilling
 Open the Top Lid and fill water with a separate container. Fill until the FULL mark is reached. Do
not over fill as hot water may splash out during boiling.
 Close top cover, ensure lid is secured by pressing firmly down till “click” sound is heard.
Boil Water
Unit will begin to operate once power is connected. First attach power cord to unit’s receptacle then
plug in to wall outlet.
 Do not open top cover while unit is in boiling process.
 Do not add water when appliance is in boiling process.
 Do not obstruct the top lid steam vent.