Appliance Inc. Electric Grill User Manual

SAVE THESE INSTRUCTION!
PARTS IDENTIFICATION
A. BEFORE USE
* Carefully read this instruction manual before use.
1. Place pan into the body.
** When re-using this pan, please remove all leftovers that may be attached to the
surface of the hot plate or on the bottom of the pan. Any leftovers not removed will
cause the temperature control to not perform properly.
** Unit must be placed on a flat and even surface.
2. Make sure the switch knob is turned to OFF position.
3. Plug the AC power plug into a wall outlet.
** Unit will not turn on if pan is not properly placed into body.
B. USAGE
1. Fill pan with water, soup or oil and turn the switch knob to the suitable position. Cover
lid. (Caution: pan will not work if empty)
2. Indicating light will blink when in use.
3. Adjust temperature accordingly.
** To use the grill, simply remove the pan from the body and replace with the grill.
Adjust temperature accordingly.
C. AFTER USE
Turn switch knob to OFF position, unplug AC power plug from outlet.
PRECAUTIONS
1. Do not use a metallic spatula or any sharp edged tools – which may damage the non-
stick fluorine coating; if scratched, the coating may peel off.
2. Do not place unit on any low heat resistant surface.
3. When cooking and removing the lid, be careful of hot steam.
4. Do not place unit on the following:
 Uneven surface
 Unstable surface
 Next to, or nearby, anything producing high heat, such as the gas range
5. When in use, do not let the body plastic or pan fall and collide.