DIGITAL ULTRASONIC HUMIDIFIER APPLE SERIES MODEL: SU-2081 To prolong the life of this humidifier, using distilled water is highly recommended. Do not add fragrance or oil in the water, it will cause the machine to malfunction and void the warranty.
TABLE OF CONTENTS Table of Contents 1 Introduction 2 Important Safety Instructions 2 Note on Humidity Level 3 Parts Identification 3~4 Operating Instructions 5 Protection Features 6 Troubleshooting 6 Clean and Maintenance 7 Storage 7 Technical Specifications 7 Warranty 8 1
INTRODUCTION Thank you for purchasing Sunpentown Digital Ultrasonic Humidifier. Each unit has been manufactured to ensure safety and reliability. Before using for the first time, please read the instructions carefully and keep them for future reference. IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Use this humidifier only as described in this manual.
NOTE ON HUMIDITY LEVEL • It is best to keep the humidity level between 30~50 percent of relative humidity. • The comfort level of humidity will vary from room to room and with changing room conditions. • In cold weather, windows and even some walls may fog or develop frost from excessive indoor humidity. If this occurs, reduce the mist intensity setting or humidity setting to avoid damage from condensed water dripping on windowsills.
C. Control Panel 1 2 3 4 5 6 7 1. ON/OFF: power button • Press once to turn unit ON. • Press again to turn unit OFF. Note: The Power Indicator will lit once plug is connected to the outlet. 2. ION: ionizer button • Press once to turn Ionizer feature on. ION will display on LCD. • Press again to turn Ionizer feature off. 3. LIGHT: color changing night light • Press once to turn on feature. • Press again to turn off. 4.
OPERATING INSTRUCTIONS • Remove water tank by grasping the housing firmly and pull upwards. • Turn water tank over and turn the cap counter-clockwise to open. Fill with COOL tap water or DISTILLED water. DO NOT USE HOT WATER. • Replace the fill cap by turning clockwise – do not over tighten. NOTE: When carrying a filled water tank, place one hand under for support and do not carry by the mist nozzle.
D. Change Humidity Setting • To change set humidity: Press SETTING button twice and SET RH will flash. Press or − button to set desired humidity setting. Range is 0 to 99. • Press SETTING button again when done. • Once the unit sense that the room humidity has reached set humidity, unit will cease to deliver mist output. Once the room humidity level falls below the set humidity level, unit will resume to deliver mist output.
TROUBLESHOOTING 1. Unit is not producing mist. • Check if unit is powered on. • Check if water is in the tank. • Check if water tank is properly placed onto the body. • Check if room humidity has reached or is over the set humidity level. • Select a higher mist output level. • Check if the hygrostat is wet or damp, and reading of room humidity level is excessively high. • Remove water tank and drain water from the base.
TECHNICAL SPECIFICATIONS Input voltage Power consumption Coverage Water tank capacity Water output capacity Unit dimension Foot print Net weight 120V~60Hz 32W 150 ~ 200 sq. ft. 2.45L 7.5 L per 24 hours 10.75” L x 5.75”W x 11” H 8.5” x 4” 4.25 lbs Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge.
