Use and Care Manual

- 8/12 -
HEPA FILTER
The filter cannot be washed, or it will lose its dust trapping ability.
Check HEPA filter frequently and clean when dirty.
1. Release the lower dust bin before clean the HEPA filter.
2. Twist the filter counterclockwise to release it (see photo below).
3. Clean HEPA filter by using a soft brush and gently tapping over a
trash container.
4. Replace the filter assembly in the dust bin lid, twisting clockwise to
lock into position.
5. Replace the lower dust bin.
HEPA filter can be cycle used, but it should be replaced if necessary.
To remove the upper dust bin for cleaning, unlock the switch from the back
of the dust bin and pull the dust bin forward.
EXHAUST FILTER
The filter cannot be washed, or it will lose its dust trapping ability.
Check exhaust filter frequently and clean when dirty.
Press inward on each side of exhaust filter cover and pull out to remove from
vacuum cleaner (see photo below).
Remove the exhaust filter.
Clean exhaust filter by gently tapping over a trash container.
Replace the exhaust filter, carefully positioning it so that it fits into the motor
cover. The grey edge of the filter should be facing away from the operator.
Push only on filter frame, not on filter itself.
Replace the exhaust filter cover by placing tabs in slots and pushing in until
cover snaps into place.
To remove the upper dust bin for cleaning, unlock the switch from the back of
the dust bin.
FILTER CHANGING /CLEANING