Use and Care Manual

Installation
Note: Once the exhaust hose assembly and adjustable slider kit are prepared, choose from one of the following installation methods.
Installation for double-hung window
Cut the adhesive foam
seal A and B strips to the
proper lengths and attach
them to the window sash
and frame
Installation for sliding window
Insert the slider kit
assembly into window
opening.
Foam seal C
(Non-adhesive type)
Window slider A
Window slider B
(if required)
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Security Bracket
2 Screws
Window slider A
Window slider B
(if required)
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Foam seal C
(Non-adhesive type)
2 Screws
Security
Bracket
Cut the adhesive foam
seal A and B strips to the
proper lengths and attach
them to the window sash
and frame
Insert the slider kit
assembly into window
opening.
Cut the non-adhesive
foam seal C to match
the width of the window.
Insert the seal between
the glass and the
window frame to prevent
air and insect from
getting into the room.
Insert the slider kit
adaptors into the holes
on the slider kit.
If desired, install the
security bracket
with 2 screws.
If desired, install the
security bracket
with 2 screws.
Cut the non-adhesive
foam seal C to match
the length of the window.
Insert the seal between
the glass and the
window frame to prevent
air and insect from
getting into the room.
Insert the slider kit
adaptors into the holes
on the slider kit.
7