User's Guide

SPECIFICATIONS
ADDITIONAL INFORMATION
CLEANING AND MAINTENANCE
FAQ
Q：
A：
Q：
A：
Q：
A：
Q：
A：
Dimension
Materials
Battery Capacity （mAh）
Wireless Connection
Charging Port
Sensor
Standby Time
Continuous Use Time
Charge Time
Dimension
Color
H43mm * W34mm * D12mm
ABS
300mAh Lithium Battery
BLE
MicroUSB（Double head）
6-Axis Gyro Sensor
Approx.1 months
Approx. 4 hours
Approx. 40 mins.
H53mm * W10mm
Full RGB Led
W
eight (oz)
8
10
12
14
Materials PU, Cotton, Mesh Fabric, Elastic Band
Lenght (cm)
27
27
28
29
Width (cm)
27
27
28
29
Head Thickness (cm)
27
27
28
29
（Glove model：MVBG0001）
How do I charge the smart gloves?
The Motion Modules charge individually through a microUSB
port. Remove the Motion Modules from the gloves, insert a
microUSB cable into the module, then connect the cable to a
USB power source.
How long does it take to fully charge each Motion Module?
Each module takes approximately 40 minutes to fully charge.
While charging the Motion Module will light up red, and once
the module is fully charged, the lights will turn off.
How long is the usage duration on a full charge?
A full charge can provide approximately 4 hours of continuos
use. On standby (sleep mode), the product can maintain its
battery capacity for about one month.
What is the effective Bluetooth connection range of the
product?
In an open empty space, the product can maintain a stable
Bluetooth connection up to 30 meters. However, in normal
home environments with other wireless devices nearby, the
product's furthest optimal range is about 10 meters.
To avoid signal interference during the initial pairing and setup
process, please turn off nearby Bluetooth devices.
Sweat may cause odor overtime. To improve the longevity of the
gloves, after using the gloves, place them in a cool and ventilated
place so they may properly dry.
The Motions Modules are not water resistent and should be
removed prior to cleaning the gloves.
If you are still unable to detect your device during the pairing
and setup process within the App, restart your phone or try
turning the Bluetooth off and back on again.
For iPhone users with IOS 11 and higher, the system may
periodically place the Bluetooth into sleep mode, therefore you
may need to toggle Bluetooth off and back on again.
Baking soda is an effective deordorizer that can help neutralize
odors. If odor develops and persists, you may cover any exposed
electrical ports with masking tape, then carefully and generously
sprinkle a palm-full of baking soda on the smooth surface side of
the interior. Let the gloves sit in a cool place for approximately 2-3
days. Empty the gloves of baking soda in a bin, then pat the gloves
thoroughly to remove any excessive powder.
Soak a cloth in clean water,wring it well, then gently wipe off any
surface stains from the leather gloves.
The gloves are not water proof and should not be submerged in
water. Water can damage the interior foam and the internal electric
circuitry.
1.
2.
3.
1.
2.
1.
2.
The gloves should only be wiped gently with a cloth. Avoid alcohol
or other harsh chemical liquids,as it can damage the glove
materials.
Do not wipe the gloves with wet paper towels over a prolonged
duration of time. The leather can corrode if subjected to long term
contact with water.
Do not expose the gloves to the sun for a prolonged duration of
time. Long term exposure will cause the gloves to age and dry out.
User manual