Switch User Manual

May 2002 T-38324-A Page 4-1
4. Installing the CS4000 Mini
Controller with Ethernet
This chapter shows you how to mount and wire the CS4000 Mini Controller with Ethernet.
Mounting the CS4000 Mini Controller with Ethernet
The CS4000 Mini Controller with Ethernet is installed vertically with the back flat against the
mounting surface. Allow sufficient space around the controller to attach the power cable, tool cable,
I/O cable and printer cable. Also be sure to allow space to remove the cover from the enclosure.
CAUTION! Mount the CS4000 Mini Controller with Ethernet away from
moving machinery and lift trucks on a structure that does
not vibrate. Do not mount the CS4000 Mini Controller with
Ethernet near large electrical systems, motors, welding
equipment, or in an area of temperature or moisture
extremes.
Figure 4-1 shows the dimensions and mounting holes on the CS4000 Mini Controller with Ethernet.