Switch User Manual

CS4000 Mini Controller with Ethernet
Page
iv
T-38324-A 39-30-38324
If you want to use the CS4000 Mini Controller with Ethernet with a network or laptop computer, refer
to Chapter 5. Setting Up the Ethernet, Chapter 6. Setting Up the 485 Network and Chapter 7. Setting
Up the RS-232 Link that describe the methods by which you can connect the CS4000 Mini Controller
to a network or laptop computer.
You will find Chapter 8. Maintenance/Troubleshooting and Chapter 9. Technical Information provide
you with technical details for maintaining and troubleshooting the controller.
Conventions
The following conventions are used throughout this manual for the safety of personnel, equipment,
software, and data. The conventions include warnings, cautions and notes, as follows:
WARNING! Information inside the WARNING! box concerns the
protection of either personnel (or an action that could result
in a systems failure). The information is indented and in
italicized boldface type.
CAUTION! Information next to CAUTION! concerns the protection of
equipment, software, and data. The information is indented
and in italicized boldface type.
NOTE: Information next to the NOTE caption is designed to bring your
attention to a certain characteristic of software or hardware
operation. The information is indented and italicized.