User Guide

won’t wipe out any data. But if the card has been in use, keep in mind hat any data stored on the card
will be lost during formatting.
You can also insert once of these cards into the camera’s memory slot until a click is heard and connect
the camera to your PC using the included USB cable.
Windows Users
Download the formatting utility from: http://support.spytecinc.com/help/article/link/gui-format-
program
Format the card as FAT32. Quit all other programs including the anti-virus, firewall, browser and file
manager. Otherwise, it will fail to start formatting. Disable the computer sleep mode. There are two
removable drives added. Choose the drive for the microSD card with capacity 59 / 63 / 128 GB listed.
The allocation unit is 32768. Choose “quick format” and press start. Once finished, if the memory card
still cannot record, please do it again but uncheck the “quick format”. It will take between 2- and 9-
hours to finish. Do not touch anything during this time and make sure the power supply and cable
connection are stable.
Macintosh Users
Format the card as “MS-DOS FAT” by using spotlight to search for “disk utility”. There are two
removable drives added. Choose the drive for the microSD card with capacity 59 / 63 / 128 GB listed.
Choose Erase. Choose “MS-DOS FAT ” under the Format. Press “Erase” at the lower right corner.
Then press “Erase” in the new pop-up windows. Wait for a while, making sure and that the power
supply and cable connection are stable. Formatting should be complete.
For more help formatting cards greater than 32GB, see:
http://support.spytecinc.com/help/article/link/64gb-sd-card-formatting-guide
http://support.spytecinc.com/help/article/link/how-to-video-formatting-a-64gb-sd-card
Firmware Upgrade
An occasional firmware upgrade may be available for the ZN62.
1. Insert a microSD card with a capacity of 32GB or less into the ZN62.
2. Connect the ZN62 to a computer.
3. Visit http://support.spytecinc.com/ and search for the ZN62. If a recent upgrade is listed,