User Guide

Getting Started
The ZN62 must be first set up using its mobile app on your Android or iOS device through a Wi-Fi
network. The camera will not operate until setup is complete.
Charging the Battery
The fastest way to charge the ZN62 is by plugging the AC adapter into a wall outlet or power strip
while the other end of the cable is connected to the USB port on
the camera. If this is the product’s first use or the battery hasn’t been refreshed in several months,
figure on a charging time of 4 hours (when not recording) or until the orange LED turns off. When you
remove the camera from the USB power cable, the LED will shut off. Charging the camera from a
computer’s USB port will take longer. Recharging the camera regularly shouldn’t take more than a
few hours depending on how much the battery has been depleted.
Insert a Memory Card
Insert a microSD memory card with a capacity of 32GB or less so you don’t have to go through
additional reformatting steps. The camera supports cards with up to 200GB, but additional
formatting is required. See “64 - 200GB microSD card Support” on pg. 18 for instructions.