User Guide

GUI (Graphical User Interface) configuration - recommended method
On Windows it is recommended to always use the program mSetup.exe to modify the camera's
configuration or format the SD card. mSetup communicates directly with the camera and makes
configuring the camera a very simple task.
The camera must be in Webcam mode in order to set the parameters. See Webcam Mode,
above.
Manual configuration
It is also possible to manually change the configuration settings by using the On Screen Display
(OSD) by connecting the camera to an external Monitor/TV. This requires a special cable.
1. Disconnect the camera from the PC and turn it off.
2. Connect the camera to an external monitor/TV using the special cable.
3. Optional. You may also connect the USB plug to a power source. The camera will
automatically turn on.
4. Turn on the camera by pressing the Power button until the LEDs begin to blink.
5. Long-press the Shutter button to enter OSD Menu Mode.
6. Briefly press the Shutter button to switch between Recording settings and Basic settings.
Ensure that no parameters are highlighted.
7. Briefly press the Mode button to move down the list or the Power button to move up the list.
8. Briefly press the Shutter button to change a parameter value.
9. Use the Mode button or the Power button to move down or up the list (see above).
10. Briefly press the Shutter button to select the value.
11. Long-press the Shutter button to exit OSD Menu Mode and return to Standby Mode.
► The meaning of the different buttons are shown on the OSD. Up, Down, Enter
► In order to switch between Recording settings and Basic settings make sure no parameters
are selected. Use the appropriate buttons to move the selection up or down to the top or the
bottom of the list.
► Also see OSD (On Screen Display) Menu, below.
Using Software to configure the camera
The Windows program mSetup.exe will automatically configure the camera with the parameters
you require (see above). It will also accurately set the camera's date and time or allow you to
format the SD card. Detailed instructions can be found in the program by clicking the "Help" button.
The camera must be in Webcam mode in order to set the parameters
OSD (On Screen Display) Menu
Connect the camera to a monitor or TV and then turn it on.
► Long Press the Shutter button to enter Setup Mode. See above (Camera Setup - Manual
configuration).
► To enter Playback Mode, press the Mode button to cycle from Video Mode1 -> Video Mode2 ->
Photo Mode -> Playback Mode.
► When in Video Mode1, Video Mode2 or Photo Mode double-click the Shutter button to turn the
OSD overlay (text/icons) off or on.
► When in Video Mode1 or Video Mode2 double-click the Mode button to turn the microphone on
or off.
► Playback Mode. Double-click the Mode button to cycle between the Video, Photo and Locked
folders
l
Double-click the Mode button to cycle between the Video, Photo and Locked folders
l
Use the Mode (Down) or Power (Up) buttons to select the file to play.
l
In Video Mode, briefly press the Shutter button to play the video. See below (Playback Mode
Instruction Manual Mobius Min... 5
10/21/2016 1:05:50 PM