User Guide

SPYTEC A119 DASH CAMERA USER GUIDE 2
Installation
Make sure the car engine is shut off before installing the A119. With the camera off
and its darkened display screen facing up, insert a microSD card, gold contacts
pointed up, into the memory card slot. For a quick start, use a memory card with a
capacity of 32GB or less. If you go with a 64GB card, it must be properly formatted.
See “64GB microSD Card Support” on pg. 21 for formatting instructions.
Before mounting the camera with the adhesive pad, connect the power cable so
that the camera turns on and you can hold it in place where you intend to mount
it. One end of the cable plugs into the USB port on the camera; the other end into
the included dual-port charger inserted in the vehicle’s cigarette lighter. It there’s a
formatted card present, the camera will begin recording. Otherwise it will indicate that
there’s no memory card or you may be advised to format the card.
Note: Choosing the formatting option deletes all data on the card, so make sure
you’ve rst transferred any video or photos you want to keep.
Hold the camera vertically against the windshield by the rear view mirror so that it’s
centrally located with the lens pointed outward to take in the road while the camera’s
LCD and buttons face you. Check the live view on the screen. You can adjust
the frame using two ngers to grab the lens housing. The outer housing ratchets
vertically; the inner housing adjusts horizontally.