User Guide

page 16
INCAMERA FORMATTING
The camera contains a built-in formatter, which is one of several ways to format a microSD
card.
1. Disconnect the camera and ensure it is turned off.
2. Turn on the camera and wait until it is in one of the Standby modes (steady yellow, blue
or red LED).
3. If the camera was set to auto-record, press the Shutter button to stop the recording.
4. Press and hold down the Shutter button. Do not release the button.
5. Very quickly press the Mode button four times.
6. If the LEDs don’t start to blink, release the buttons and start over again at Step #4.
7. The LEDs will blink very quickly while the card is being formatted.
8. Release the Mode and Shutter buttons once the LEDs start to blink (see above).
9. The camera will return to Standby mode when formatting is finished.
Note: Using in-camera formatting, a card over 32GB will be formatted in exFAT.
Otherwise, it’s formatted in FAT32.
3 | camera setup