User Manual

LED On / Off
For the most clandestine surveillance in a less-than-secure space, you’ll want to
minimize the chances of giving away the camera’s position from a lit LED. You can
disable the multi-colored light entirely. After clicking on the LED Off setting, make sure
to click on Sync Settings to DVR and keep the camera’s three-way switch in Custom
mode.
The LED is enabled in Continuous and Triggering modes. It’s also enabled by default
when recording in Custom mode.
Tip: It may not be prudent to turn off the LED. In so doing, you’re disabling the
camera’s status indicators.
Triggers
Continuous video recordings are comprehensive, but they consume storage and
make locating incidents laborious. Alternatively, you can set the camera to start video
recording by using up to four triggers: body heat, voice, vibration and/or motion. The
camera’s responsiveness to these triggers each can be adjusted according to three
levels of sensitivity. And they can be programmed to be triggered only during preset
blocks of time.
SPYTEC ZIR32 720P NIGHT VISION INTELLIGENT SECURITY CAMERA USER GUIDE 10
Mic
In some situations, audio in a video recording is irrelevant or undesirable. You can
turn off the camera’s microphone by clicking on the Disable button. Make sure to click
on Sync Settings to DVR and keep the camera’s three-way switch in the Custom
mode. The mic is enabled in Continuous and Triggering modes. It’s also enabled by
default when selecting High Quality Video recording in Custom mode. It is disabled
for Medium- and Low-quality recording.