User Manual
Using the Zetta Widget software, rst click on the Disable setting under Motion-
Trigger Sensitivity. Then, choose one of the following:
Car-Activate Recording: To capture video while driving, the camera will
automatically power on and start recording when the car’s ignition is started. The
camera will automatically shut down when the car is turned off.
Car-Stop Recording: To capture video while the car is parked, the camera will
automatically start recording video when the car is turned off and stop recording
video when the ignition is started.
Car-Activate & Car-Stop Recording: To capture video while both driving and when
the car is parked, the camera can be set to record for 24-hours of coverage.
After making your selection, make sure to click on Sync Settings to DVR. In addition
to leaving the camera’s three-position switch in the Custom mode, the camera must
be plugged into the vehicle’s cigarette lighter socket using the optional 5-volt car
adapter and included USB cable.The camera recognizes whether the vehicle is
running or not based on whether power is owing into the socket. In the case of a
vehicle with an always-on powered socket, recordings must be manually started and
stopped.
Auto On / Off
Clicking on Scheduled Recording will activate recordings at the times you’ve
set. Clicking on Disable will cause the camera to ignore scheduled recordings.
Remember to click on the Sync Settings to DVR button in the software and leave
the camera’s three-position switch in Custom mode. Auto On/Off is disabled for
Continuous and Triggering modes.
Scheduling the Camera for Auto Recordings
Most times, you’ll want to leave the camera unattended so that it starts and stops
recordings on its own. Using the Zetta Widget software, you have the exibility to
schedule the camera to shoot video at various times on a weekly schedule. You
set each block of recording time in one-hour increments. You can also designate
whether the camera starts recording based solely on preset times or whether the
programmed times puts the camera on standby ready to record only when triggered
by an external event such as a voice, vibration or motion.
SPYTEC ZIR32 720P NIGHT VISION INTELLIGENT SECURITY CAMERA USER GUIDE 14