User Manual

SPYTEC ZIR32 720P NIGHT VISION INTELLIGENT SECURITY CAMERA USER GUIDE 20
64- to 200GB microSD card support
If a high-capacity card is not recognized by the ZIR32, you’ll need to properly format
it. If the card has not been used before, formatting it won’t wipe out any data. But if
the card has been in use, keep in mind that any data stored on the card will be lost
during formatting.
Fully insert the up to 200GB microSD card into the camera’s memory slot until a click is
heard and connect the camera to your PC using the included USB cable.
Windows Users
Download the formatting utility from:
http://support.spytec.com/help/article/link/gui-format-program
Format the card as FAT32. Quit all other programs including the anti-virus,
re-wall,
browser and le manager. Otherwise, it will fail to start formatting. Disable the
computer sleep mode. There are two removable drives added. Choose the drive
for the microSD card with capacity 59 / 63 / 128 GB listed. The allocation unit is
32768. Choose “quick format” and press start. Once nished, if the memory card
still cannot record, please do it again but uncheck the “quick format”. It will take
around between 2- and 9-hours to nish. Do not touch anything during this time and
make sure the power supply and cable connection are stable.
Macintosh Users
Format the card as “MS-DOS FAT” by using spotlight to search for “disk utility”. There
are two removable drives added. Choose the drive for the microSD card with capacity
59 / 63 / 128 GB listed. Choose Erase. Choose “MS-DOS FAT” under the Format.
Press “Erase” at the lower right corner. Then press “Erase” in the new pop-up windows.
Wait for a while, making sure that the power supply and cable connection are stable.
Formatting should be complete.
For help formatting cards greater than 32GB, see:
http://support.spytec.com/help/article/link/64gb-sd-card-formatting-guide
http://support.spytec.com/help/article/link/how-to-video-formatting-a-64gb-sd-card