User Manual

When Should I Use the Reset Button?
Assuming that the camera is charged but locked up, try using the Reset button
under the camera. If you can, rst remove the memory card. Because the button
is recessed with pinhole access, grab a pin, toothpick, wire or any tool sufficiently
narrow to t into the hole. The reset button will click when pressed. Keep it pressed
for 5 seconds. Camera settings will be returned to the factory defaults. If you were
unable to remove the memory card, you may lose any content.
How Do I Know the Camera Is on Standby?
With the three-posiiton switch set to Custom Mode and no light coming from the
LED, press the Power button until the green LED turns on. It will shine steady, then
ash for a few seconds and turn off. The camera is set for standby. You can place
the camera in position and walk away. If, on the other hand, you press the LED for
two seconds, it turns orange and shuts off, the camera has shut down and will not
wake up on its own. Press the LED until the green LED comes on, ashes for a few
seconds, then turns off. The camera is set for standby. It’s important to recognize
the state in which you leave the camera if you expect it to record video based on
Schedule Settings.
How Can I Make the Camera More Secure?
You can purchase the optional adjustable mount for the Zetta ZIR32. It enables
covert and secure mounting. See views of the mount on next page.
Can I Schedule Recordings Outside of Military Time?
No. You can’t switch the software from military (24-hour) to AM and PM time.
SPYTEC ZIR32 720P NIGHT VISION INTELLIGENT SECURITY CAMERA USER GUIDE 21
How do I check card memory?
If you’re not sure how much free space the memory card in your camera contains,
connect the ZIR32 to your computer using the USB cable. The device will pop up on a
Windows computer as a removable disk followed by a letter. Right-click on Properties
to see how much space has been used and how much free space remains.
Can I use the ZIR32 as a live Web cam?
No. The camera will not record when attached to a computer via its USB cable. It will
charge and play recorded video through a media player on your computer.