User Guide

Auto On / Off
Like using the On/Off alarm setting on a clock radio, clicking on Scheduled Recording will activate
recordings at the times you’ve set. Clicking on Disable will cause the camera to ignore scheduled
recordings. Remember to click on the Sync Settings to DVR button in the software and leave the
camera’s three-position switch in Custom mode. Auto On/Off is disabled for Surveillance and On-the-
go modes.
Scheduling the Camera for Auto Recordings
Most times, you’ll want to leave the camera unattended so that it starts and stops recordings on its
own. Using the Zetta Widget software, you have the flexibility to schedule the camera to shoot video
at various times on a weekly schedule. You set each block of recording time in three-hour increments
and book them beginning at 3 am, 6 am, 9 am, noon, 3 pm, 6 pm, 9 pm or midnight. You can also
designate whether the camera starts recording based solely on preset times or whether the
programmed times puts the camera on standby ready to record only when triggered by an external
event such as a voice, vibration or motion.