User Guide

Turn on the camera, click on Settings on the left side of the Zetta Widget software, then scroll all the
way down to the Auto On/Off selection. Click on Scheduled Recording, then the Edit link. You’ll see
the Schedule Settings screen with a 7-day, 24-hour calendar. Move your mouse to a particular time
slot. You can either click and let go to highlight a 3-hour block or click and hold the mouse to extend
the time in multiples of 3 hours.
Upon highlighting a time block, the Create Task box appears. The default is to Always Record during
the designated time block. To instead set triggers during the time block, click on Triggering Record,
and check off up to three ways for the camera to start recording: Voice-T rigger, Vibration-Trigger
and Motion-Trigger. The camera will stand by to record during the set time period but record only
when triggered.
Tip: The advantage of setting triggers is that you won’t have to review hours of non-eventful
footage.
Once you click OK, you’ll be able to view your choices on the calendar. Designated time blocks are
outlined in gray. As the legend at the bottom of the calendar shows, a transparent block indicates an
Always Record task. Blocks that are occupied by one or more colored icons indicate that you’ve set
one or more triggers:
You can always change your options by right-clicking within a block, then choosing Edit Task or Delete
Task. If you choose Edit Task, the Create Task box will appear with your previous settings. If you
Voice -Trigger Option
Vibration -Trigger Option
Motion -Trigger Option