User Guide

saved to the camera. By default, the date and time are superimposed on the bottom-right corner of
the video as it’s being recorded. See the Time stamp (pg. 8) section if you want to record videos
without the date and time.
Note: Remember to connect the camera to your computer to adjust the time when the clock springs
ahead or falls back an hour.
Setting the Mode
To get the highest resolution during manual recording, move the three-position switch to the middle
position, the On-the-go mode . For less resolution but longer recording time before running out of
memory or overwriting previous video in a circular recording, move the switch to Surveillance mode
.The frame rate is the same for both modes. Neither mode supports the automated triggers or
unattended recording times you can set using the Zetta widget. If you’ve set the camera from the
Zetta widget to start recording on its own from a trigger or designated time, you must leave the slider
in the Custom position .