User Guide

Recording a Video
To start a recording manually, make sure the mode is set for Surveillance or On-the- go and press and
hold the Power button until the green LED lights up. It will shine steadily, then after a few seconds
flash continually to indicate that a recording is in progress. To end a recording, hold the Power button
for two seconds. The LED will turn orange, then turn off to indicate recording has stopped.
Note: The Custom mode is used to start a recording automatically from designated triggers or at
preset times according to your instructions downloaded to the camera from the Zetta widget
computer software.
Customizable Features
The Z12’s self-starting flexibility becomes evident when you take advantage of the camera’s
programmable features using the Zetta Widget software.
To see the Custom selection screens,change the Setting Mode from Express to Custom, then click on