User Manual

Table Of Contents

WAN / LAN

1 PC connection

1.1 Prepare for connection

1.1.2 Ping IP address of IP camera

Connect the IP camera and PC to the same Local Area Network with

the network cable and power up all the equipments. (Refer to Fig 1-05):

2 Left click【Start12111】(or use shortcut key “win button+R” )→input

“cmd”→press “Enter” button of keyboard to pop up the command

prompt window→input “Ping***.***.***.***” and then press the Enter key

to check the system statistic connection information(For example, the IP

address of IP camera is 192.168.1.168，please input ”ping

192.168.1.168”). Ping statistics like these means that the signal

communication of the PC and IP camera is normal, your IP camera

works normally (Refer to Fig 1-06).

Packets: Sent = 4, Received = 4, Lost = 0 <0% loss>

(1-05)

(1-06)