Use and Care Manual

2.3 System maintenance

• Perform a System update, Logo update or Resource update from USB storage and click start

2.4 Factory setting

• Factory reset “all” or each setup choice you choose

3.0 SYSTEM SETUP

3.1 General Set-up

• Date time: This option is used to set up the date and time. If the wrong information is left populated, the

DVR will not record properly

*Note: click “Apply” to save date and time changes

• Date format: [year, month, day], [month, day, year], [day, month, year]

• Auto Logout: When enabled, the DVR will automatically logoff the present user if there is 10 minutes

without operation. They will need to login again to operate the device

• Key buzzer: “Enable” will activate a beep when the DVR buttons are pushed. “Disable” will prevent

beeps from sounding when the buttons are pushed

• Language: You can select one of six different languages