Instructions / Assembly

ManualsBrandsSPYCLOPS ManualsElectrical4-Channel D1 500GB DVR Kit with 4-Bullet Cameras

1

2

3

4

5

SPY-DVR4KIT1 / SPY-DVR4KIT2

Quick Setup Guide

The SPY-DVR4KIT1 / SPY-DVR4KIT2 are a complete home surveillance kit that has everything needed for a

simple plug-n-play operation. Below is the list of components that come in the kits:

SPY-DVR4KIT1

(1) 4 channel DVR with 500GB Hard Drive

(2) Plastic mini dome cameras

(2) Weather resistant mini bullet cameras

(1) 120v to 12v AC/DC power supply

(1) 5 way splitter for power supply

(4) 18 meter video/power cables for the cameras

(1) BNC to RCA cable for connection to a TV or monitor

(1) Mouse

SPY-DVR4KIT2

(1) 4 channel DVR with 500GB Hard Drive

(4) Weather resistant mini bullet cameras

(1) 120v to 12v AC/DC power supply

(1) 5 way splitter for power supply

(4) 18 meter video/power cables for the cameras

(1) BNC to RCA cable for connection to a TV or monitor

(1) Mouse

Summary of content (6 pages)

PAGE 1
SPY-DVR4KIT1 / SPY-DVR4KIT2 Quick Setup Guide The SPY-DVR4KIT1 / SPY-DVR4KIT2 are a complete home surveillance kit that has everything needed for a simple plug-n-play operation.
PAGE 2
Making the Connections Once you have unpacked the equipment and found a suitable location for the DVR, begin making the connections as follows: TV MONITOR 1. 4 channel DVR with 500GB Hard Drive 6. 120v to 12v AC/DC power supply 2. Weather resistant mini bullet cameras 7. BNC to RCA cable for connection to a TV 3. Plastic mini dome cameras (VGA to a monitor—VGA not included) 4. 18 meter video/power cables for the cameras 8. Mouse 5.
PAGE 3
SPYCLOPS BASIC DVR SETUP All steps are given in order as if from home screen. If after completing a step and returning to the home screen you see a message that says “Configuration changed! To save the latest configuration?” Click “Yes” to save your settings. Step 1: First Time Log In Right click on mouse for Setup (screen will display “Username” and “Password”, do not enter any text in this window).  OK.  Setup (you will now see the main Setup screen).
PAGE 4
If you want the Username to be different than “admin” you will need to add user. To add new “User” Setup  System Tools-- User management  Add User.  Type in User Name.  Select User Access Level.  OK.  Select new “User”.  New Password.  Repeat.  Ok.  Ok. Step 3: Set Date and Time Setup  System setup – General setup  Select the correct Date and time.  Click the ‘Apply’ button.  Click ‘Yes’ to ‘Are you sure to continue’.  Ok.  Ok.
PAGE 5
Step 4: Basic Network Setup To generate the Esee ID the DVR must be connected to the network through an Ethernet cable. Setup System setup –  Network setup.  Check the DHCP box to dynamically assign an IP through the router and click the Esee box to populate the Esee ID.  Ok.  It may take up to 10 minutes for the Esee number to populate. “Configuration changed! To save the latest configuration?” Click “Yes” to save your settings.
PAGE 6
Step 6: Setup Recording Setup  System setup – Record setup  Pick the channel and day of the week you want to record.  Choose Time, Motion or Sensor for the recording mode.  Click Copy to if you want to copy the setting to another channel or to all other channels.  Ok. “Configuration changed! To save the latest configuration?” Click “Yes” to save your settings. Step 7: Video Playback  Setup – Video Playback  Pick the channel you want to play back.