User's Manual

2 of 3
Operation
RF FOB 8 button switch panel features an integrated 400 Mhz Transmitter that wirelessly sends messages
to a receiver device. Each RF FOB has a green “Transmit LED” located at the center of the RF FOB. This LED should
turn on whenever a button is being pressed or held, indicating that the RF FOB is transmitting.
The messages sent out by each RF FOB has a unique identifier which is used to distinguish them from one
another. The message sent out when pressing a button also indicates which button is being pressed to allow the
receiving device to perform a unique action for each button. The wireless receiver device only acknowledges
messages from RF FOB that are paired with it. RF FOB transmission is indicated by the Transmit LED. To pair RF FOB
8 button switch panel with the receiving device, put the receiving device into pairing mode, and pair the RF FOB to
the receiving device, following the instructions for the receiver device.
Transmitting
Not Transmitting
Transmit LED