Product Manual

1008765 Rev. B 4
5. Place the Pivot Linkage (1) onto the free end of the
Cable Rod (5). Fasten the Pivot Linkage to the frame
using a 1/4"-20 x 1-3/4" Bolt (14), 1/4" Washer
(8), Nylon Flange Bushing (9), and 1/4"-20 Nylon
Lock Nut (11). Ensure that the Pivot Linkage rotates
freely after tightening.
NOTE: The defl ector is hidden in Figure 5.
14
8
9
11
1
5
Figure 5
6. Install the Cable Retainer (3) using a 1/4"-20 x
1-3/4" Bolt (14), 1/4" Washer (8), and 1/4" Nylon
Lock Nut (11).
14
8
3
11
Figure 6
7. Install the Cable Linkage (2) to the CENTER hole on
the Pivot Linkage (1) using a 1/4"-20 Nylon Lock Nut
(11), Nylon Flange Bushing (9), 1/4" Washer (8),
and a 1/4"-20 x 1" Bolt (7). Ensure that the Cable
Linkage rotates freely after tightening.
7
8
2
9
1
11
Figure 7