Product Manual

1008765 Rev. B5
8. Push the Cable (6) through the Cable Retainer (3)
and the Cable Linkage (2). Align the cable groove into
the Cable Retainer bracket (see Figure 8:A) and use
a1/4"-20 Nylon Lock Nut (11), two Nylon Washers
(10), and a 1/4"-20 x 3/4" Bolt (12) (see Figure
8:B) to retain the cable. Ensure that the nut (D) on
the Cable is oriented behind the Cable Linkage (2) as
shown in Figure 8:C.
3
2
6
6
3
Align Cable
Groove in Bracket
A
6
3
11
10
10
12
B
2
6
D
C
Figure 8
9. Thread the #10-32 Nut (13) onto the end of the
Cable (6). Do not tighten the #10-32 Nut onto the
Cable Linkage (2).
13
6
2
Figure 9