Product Manual

ManualsBrandsSpyker ManualsLawn & GardenSpreader Side Deflector — Fits ERGO-PRO 50lb. Spreaders

1018412 Rev. A

Model SPYSD-50 & SPYSD-80100

Side Deflectors

Spyker Spreaders

IMPORTANT

This manual contains information for the safety of persons and property.

Read it carefully before assembly and operation of the equipment!

OPERATOR'S MANUAL

Summary of content (4 pages)

PAGE 1
OPERATOR'S MANUAL Model SPYSD-50 & SPYSD-80100 Side Deflectors Spyker Spreaders Contact Us at 800.972.6130 ! ! IMPORTANT This manual contains information for the safety of persons and property. Read it carefully before assembly and operation of the equipment! 1018412 Rev.
PAGE 2
Parts Breakdown 1 9 2 1 1 9 2 1 9 3 3 9 7 7 7 7 7 7 7 4 7 4 6 6 6 6 5 5 8 10 10 8 SPYSD-50 Ref # SPYSD-80100 Part # Description Qty Ref # Part # Description Qty 1 1017034 Nut, Speed 4* 1 1017034 Nut, Speed 4* 2 1017648 Rod, Hinge 3 1017653 Bracket, Deflector 1 2 1017648 Rod, Hinge 1 1 3 1017453 Bracket, Deflector 4 1000684 1 Deflector Shield, Side 1 4 1001181 Deflector Shield, Side 1 5 6 1017649 Bar, Kick 1 5 1017649 Bar, Kick 1
PAGE 3
Assembly 1. Place end of the hinge rod (2) on a solid surface. Align a speed nut (1) on the end. 1 2 NOTE: Protruding washer lip (1) should be on the outside edge. 7 Using a small socket (such as 7/32") and a hammer, tap down on the speed nut (1) until it is 1/8" down the length of the hinge rod (2). NOTE: This step may be easier if the hinge rod (2) is braced in place with a vice. 3. Fasten the kick bar (5) to the assembled side shield using two hex head bolts (6) and two lock nuts (7).
PAGE 4
Assembly 5. Remove existing nuts, washers and bolts holding the left side of the spreader hopper to the frame. 6. Loop the spring (10) through the spring bracket added on Step 4 and the kick bar added on Step 3. NOTE: Set aside the white washers (B) that you've removed from your spreader. (Discard the removed nuts and bolts). 10 Add the salvaged white washers (B) to each of the two new bolts (9).