CELL-LINK QUICKSTART GUIDE v.1.
ENGLISH In the box 1x CELL-LINK cellular module 1x Memory card adapter cable 1x Mounting strap 1x Quickstart guide 1x MicroSIM card (preactivated and inserted into the CELL-LINK) NOTE: Memory card and batteries are sold separately. User manual, latest firmware, and FAQ available at: SPYPOINT.
ENGLISH 1 2 3 4 9 10 11 5 6 7 8 12 16 13 14 15 3
ENGLISH PREPARATION SELECT A POWER SOURCE • Lithium or alkaline AA batteries • 12V rechargeable battery (#KIT-12V) • 3.7V rechargeable battery pack (#LIT-10) NOTE: We recommend using the SPYPOINT #LIT-10 rechargeable lithium battery pack, sold separately. FOR BEST RESULTS AND NO LEAKAGE: • Use only new lithium or alkaline batteries. • Do not mix old and new batteries. • Do not use rechargeable AA batteries (their lower voltage can generate operational issues).
You must activate your CELL-LINK via the free "SPYPOINT app" or by logging on to the SPYPOINT.COM website. ENGLISH ACTIVATING YOUR CELL-LINK FINDING THE ACTIVATION CODE The activation code is located inside the CELL-LINK battery compartment door. You will need this unique code to activate the CELL-LINK. SPYPOINT APP Follow these steps: 1. On Google PlayTM or the App StoreTM, search for "SPYPOINT". 2. Download and install the app on your smartphone or tablet. 3. Start the app.
ENGLISH ACTIVATING YOUR CELL-LINK SPYPOINT website Follow these steps: 1. On the SPYPOINT website, select "LOGIN" in the top navigation menu. On the displayed page, select "Register", fill out the required fields, then log in. 2. Select the + sign on the far right of the page; in the list, select "CELL-LINK" then follow the steps. 3. When complete, a confirmation email with instructions on how to finalize the creation of your account will be sent to you. 4.
Open the CELL-LINK door Turn the CELL-LINK ON (ON/OFF switch) All lights flashing – Searching for signal 4. Solid bars – Signal strength 5. All lights OFF – CELL-LINK ready ENGLISH STARTING YOUR CELL-LINK 1. 2. 3. The signal search can take a few minutes to process. If only 1 bar is flashing, the network test is unsuccessful. Try moving the CELL-LINK (along with your camera) to another spot in order to maximize signal strength, then restart the cellular module.
ENGLISH INSTALLING AND CONNECTING THE CELL-LINK To connect the SPYPOINT CELL-LINK to your trail camera from any brand, follow these steps (or view our video in the Help section): 1. Open your camera door. 2. Take the CELL-LINK memory card 3. 4. 5. 6. 7. 8. adapter cable and insert the end with the SD card into your camera’s SD card slot. Keeping the SD memory card adapter cable held tightly against the case, direct the adapter cable so that it exits from the bottom of the camera case.
ENGLISH DISPOSAL ONLY USE ORIGINAL SPARE PARTS AND ACCESSORIES. If one day your camera has been used so intensively that it has to be replaced, or if you no longer have any use for it, you are obliged to dispose of it at a recycling center. Information on return points for your electrical appliance can be obtained from your local waste disposal company or from your local administrative offices.
ENGLISH FCC THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions: 1. This device must not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. THANK YOU FOR CHOOSING FAQ, user manual & latest firmware available at: SPYPOINT.COM/SUPPORT Live chat support at www.spypoint.com service@spypoint.
