Quick Start Guide

ENGLISH

PREPARATION

SELECT A POWER SOURCE

• Lithium or alkaline AA batteries

• 12V rechargeable battery (#KIT-12V)

• 3.7V rechargeable battery pack (#LIT-10)

FOR BEST RESULTS AND NO LEAKAGE:

• Use only new lithium or alkaline batteries.

• Do not mix old and new batteries.

• Do not use rechargeable AA batteries

(their lower voltage can generate operational issues).

HOW TO INSTALL AA BATTERIES PROPERLY

• Unlock and open the CELL-LINK door.

• Take the battery holder out

and insert the AA batteries into the

battery holder following polarity (+) and (-) indications.

• Place the battery holder back into the battery compartment,

an audible click should be heard.

FORMATTING YOUR MicroSD CARD

Before inserting the MicroSD card into your CELL-LINK, it must be

reformatted via a computer to ensure proper functionality.

Memory card is sold separately. Whether you choose to use a

MicroSD card you previously used in another device or a brand

new one you've just bought, its capacity must not exceed 32 GB

and it must be reformatted. Do not use the "Quick format" option.

INSERTING A MicroSD CARD

• Ensure the CELL-LINK is turned o and open its door.

• Insert a MicroSD memory card (up to 32 GB capacity) into

the MicroSD card slot with the label facing up.

• The card is inserted correctly when a click is heard.

NOTE:

We recommend using the SPYPOINT #LIT-10

rechargeable lithium battery pack, sold separately.