SPYP INT SURVEILLANCE CAMERA Adventure series · série expedition series · série summit pro series · série smart series · série TINY series · série USER MANUAL Model: HAWK v1.
SPYP INT THANK YOU FOR CHOOSING A SPYPOINT PRODUCT. ABOUT US This manual will guide you through all the features of your device so that you will get optimal use out of your SPYPOINT product. GG Telecom’s mission is to offer products that are easy to use, innovative, affordable and of exceptional quality. Our SPYPOINT products are mainly used for hunting and residential/commercial surveillance. They are distributed and shipped all over the world and the market never stops growing.
Table of contents Package contents.......................................................................4 Components...............................................................................5 Power.........................................................................................7 Mounting bracket.......................................................................8 Memory card..............................................................................8 BUSY LED..............................
Package contents SPYPOINT camera RC-1 remote control Installation strap USB cable SPYP In the box INT REMOVE CAMERA FROM THE MOUNTING BRACKET A. A. Push the tab to release the camera from the mounting bracket. B. Remove the camera. Quick start guide Camera 9 10 11 12 expedition summit pro series · série Installation strap smart series · série TINY series · série LIVE series · série series · série 15 6 www.spypoint.
Components 7 1 2 8 3 9 4 5 6 10 11 12 13 14 16 15 17 18 19 1 Photo lens 7 Mounting bracket 10 Cable lock hole 16 12V/Solar panel jack 2 Invisibles LEDs 8 Slot for installation strap 11 BUSY LED 17 USB port 3 Test light 9 Tripod mount 12 Viewing screen 18 SD card slot * 4 Light sensor 13 Navigation buttons 19 Built-in speaker 5 Battery case 14 Microphone 6 Fresnel lens 15 Power button 5 *No SIM card slot for HAWK model
Components 1 Photo lens Image sensor and infrared filter. 13 Navigation buttons Buttons to set the camera (p.11). 2 Invisible LEDs Night lighting to obtain black and white photos and videos. 14 Microphone Records sound in video mode (p.12). 3 Test light Flashes in TEST mode when there is detection and flashes 60 seconds in PHOTO/VIDEO mode to allow the user to leave without being photographed or recorded. 15 Power button Press the button to turn on or off the camera.
Power EXTERNAL (12V) This camera can also be powered by an external 12-volt DC input such as a 12-volt battery (KIT-12V, BATT-12V or KIT6V/12V) or a 12-volt adapter (AD-12V), each sold separately (p.15). During the installation of a 12-volt connection, the LIT-09 CHARGER option located in the GENERAL SETTINGS menu should be "Off" (the AA batteries can remain safely inside the camera). If combined with a lithium battery pack, the LIT-09 CHARGER option should be "On". For available accessories, see p.15.
Memory card/BUSY LED/Mounting bracket MEMORY CARD INSERTING THE MEMORY CARD A memory card is required to record photos and videos. The camera is compatible with SD/SDHC memory cards, up to 32 GB capacity (sold separately, p.15). Insert an SD/SDHC memory card (up to 32 GB capacity) in the card slot , gold contacts facing up. The card is inserted correctly when a click is heard. When the camera is turned on and no memory card is used, the camera beeps.
Settings VIEW Allows the user to view or delete recorded photos and videos on the camera screen. Use the and buttons to navigate in the interface and modify the selection, the OK button to select and the button to return to the previous menu. PHOTO Allows the user to take photos. When the PHOTO mode is selected, the test light in front of the camera will flash for 60 seconds to allow the user to leave the area without being photographed.
Settings Schedule: Photo first: Allows the user to set the operation period of the camera for each day of the week. The start and stop time programmed hours are the hours during which the camera is in action and records photos or videos. For example, if the user selects "15:00" start time and "19:00" stop time on Mondays, the camera will only detect for that period of time and will stay inactive for the remaining hours. Each day has to be configured independently.
Settings Remote control (RC-1): Info on photos: (Yes/No) (On/Off) Allows the user to have date, time, temperature and moon phases printed on the photos. Allows the user to use the RC-1 remote control which works with the REMOS wireless technology (sold separately, p.20). The remote control allows to activate/deactivate the detection of the camera and to remotely take a photo/video in an area of 500 ft.
Sound recording The SPYPOINT camera offers the possibility to record sound in VIDEO mode. When the VIDEO mode is selected, the camera automatically records the sound. Under the camera, there is a rubber cap with the inscription MIC. If the user does not want to record the sound, the rubber cap needs to stay in place. If sound recording is required, the user must lift the rubber cap and turn it slightly so that the microphone receiver is completely cleared (See figure below).
File transfer to a computer To transfer photos/videos to a computer: 1. Turn on the camera. Note that the camera has to be turned on in order for the computer to recognize the SD card. USB 2. Connect the USB cable from the camera to a computer. It is recommended to use the supplied cable. 3. The computer will detect the camera and install the driver automatically. 4. Click on "My Computer" and select "Removable Disk". 5. Then click on "DCIM" and "100DSCIM" to find all recorded photos and videos. 6.
Troubleshooting TROUBLESHOOTING Problem Possible solutions Impossible to turn on the camera • Verify if there are batteries in the camera. • Verify if the batteries are correctly installed (p.7). • Verify if the LIT-09 charger option is set accordingly to the power source (p.7). • Install the latest update (available on www.spypoint. com under SUPPORT section). • Replace alkaline batteries or recharge the lithium battery pack.
Available accessories To obtain more information on the available accessories, www.spypoint.com. Here are the main accessories available: go to Rechargeable 12V battery, charger & housing kit #KIT-12V, 12-volt 7.0Ah rechargeable battery with a water resistant ABS plastic case, AC charger, 12 ft power cable (#PW12FT) and carrying strap included. Compatible with all SPYPOINT products equipped with a 12V power jack.
Available accessories INSTALLATION AND SECURITY Cable lock #CL-6FT, 6 ft cable lock fits all SPYPOINT cameras. INFRARED BOOSTER Invisible LEDs IR-Booster #IRB-W-B, 100 invisible LEDs (completely invisible to the naked eye) wireless infrared module that allows the user to amplify the infrared lights at night for clearer shots. Compatible with REMOS technology. When used with REMOS compatible cameras, the transmitter is not necessary.
SPECIFICATIONS (HAWK) Photo recording Detection system Full HD Motion sensor PIR File format JPG Delay between each detection Adjustable from 10 sec to 30 min Time lapse mode Predefined intervals from 30 s to 1 h Night time illumination system Multi-shot mode Up to 10 photos per detection LEDs 62 LEDs Info on photos Date, time, temperature (°C/°F) and moon phase Type Invisible LEDs Exposure Automatic infrared level adjustment Capture mode Color by day, black and white by night Dimen
Limited warranty and repair This SPYPOINT product designed by GG Telecom, is covered by a one (1) year warranty on material and workmanship starting from the original date of purchase. The sales receipt is the client’s proof of purchase and must be presented if warranty service is needed. This warranty will be honored in the country of purchase only.
