user manual solar trail camera models : solar-dark and similar models* www.spypoint.com service@spypoint.com * Specifications and features may vary according to model. support.spypoint.com Refer to our website or package for details. Version 7.
THANK YOU FOR CHOOSING A SPYPOINT PRODUCT. ABOUT US This manual is designed to guide you through all the great features of your SPYPOINT device so you can optimize its use, all while making the most of your time in the field. GG Telecom is dedicated to providing you with products that are easy-to-use, innovative, affordable, and of exceptional quality. SPYPOINT products are mainly used for hunting or residential and commercial security.
table of contents / 1 Components 2-3 specifications 4 power 5-6 memory card 7 main menu 8 configuration menu 9-10 general settings 10-11 installation, mounting bracket and updates 12 transferring files to a computer 13 available accessories 14 troubleshooting 15 warranty and repairs 16
components / 2 Solar panel Lockable door latch OK button Microphone Front door Detection lens OFF/ON button Tripod mount Photo lens Cable lock hole Viewing screen Battery compartment/Back door Test light LEDs SD card slot Slot for the mounting strap Light sensor Navigation buttons 12 V jack “BUSY” light
components / 3 SOLAR PANEL Absorbs solar energy to charge the internal battery. FRONT DOOR Provides access to the OFF/ON button, the navigation buttons, the viewing screen, and the SD card slot. PHOTO LENS Captures the image. TEST LIGHT Once the camera is installed and a signal is found, the DETECTION TEST light will flash for 30 seconds, allowing you to leave the site without being filmed or photographed. LIGHT SENSOR Detects ambient lighting conditions for taking photographs.
specifications / 4 photo power sources Photo resolution 12 MP Internal rechargeable battery Included and non-accessible Photo file format JPG Alkaline or lithium batteries 8 x AA (not included) Time lapse mode 1 min to 24 hour intervals Lithium battery pack Regargeable battery pack (LIT-09/LIT-C-8) Multishot mode Up to 6 photos per detection External battery (12 V jack) 12V battery (KIT6V-12V, KIT-12V, BATT-12V) Information appearing on photos only Date, time, temperature (°C/°F), moon
power sources / 5 recharging the internal battery optional power sources This camera is designed with a non-accessible internal battery. This battery is charged by the solar panel and generates adequate power for general usage. If the user configures the camera in a way that requires a lot of battery power or installs it in an area with poor ambient lighting, it is recommended to use a backup power supply.
power sources / 6 power sources AA BATTERIES 12V EXTERNAL BATTERY LITHIUM BATTERY PACK The camera can be powered by 8 AA batteries (1.5 V). The use of alkaline or lithium batteries is strongly recommended. Be sure to respect the polarity indications (+) and (-) when inserting the batteries. The 12 V battery (#BATT-12V) plugged into the camera offers the benefit of lasting a very long time.
memory card and busy light / 7 memory card A memory card is required to record photos and videos. The camera is compatible with SD/SDHC memory cards, up to 32 GB capacity (sold separately). When the camera is turned on and no memory card is used, the camera displays "Insert memory card." Here is a table of the approximate number of pictures and videos in terms of duration that can be recorded with different memory card capacities.
main menu main menu Use the and buttons to navigate the interface and modify the selection, the OK button to confirm your selection and the BACK button to return to the previous menu. starting the camera To turn the camera on and off, press and hold down the OK button. Allows the user to start the camera in PHOTO, VIDEO or TIME LAPSE modes.
configuration menu / 9 configuration menu Allows the user to configure the PHOTO, VIDEO, TIMELAPSE and GENERAL SETTINGS. photo settings - Sets the options for PHOTO mode. Delay (Instant/10s/1m/3m/5m/10m/15m/30m) MULTIshot Allows the user to choose the delay between each detection before the camera records the next video. A longer delay minimizes the number of videos taken and maximizes battery life. A shorter delay maximizes the number of videos taken but requires more battery power.
configuration menu and general settings / 10 timelapse settings - Allows to set the options for TIME LAPSE mode. delay (From 1 min to 24 h) Allows the camera to take photos at regular preset intervals. For example, if "5 m" is selected in the TIME LAPSE mode, the camera takes a photo every 5 minutes even if there is no detection. This option allows the user, among other things, to obtain photos of game outside the detection range of the camera.
general settings / 11 general settings sensitivity (Low / Medium / High) Allows to choose the sensitivity of the motion sensor. A greater sensitivity will give a greater number of photos. Make sure the front of the camera is free of any obstructions. The area of installation should be cleared from branches or bushes. resolution (Normal / High) Sets photo quality. trigger speed (Optimal / Fast) Optimal : Takes higher quality images. Fast : Takes photos more quickly.
installation, mounting bracket and updates / 12 Camera software updates Installation with the supplied strap Go to https://support.spypoint.com/EN for instructions on how to perform camera software updates. The dimensions of the included strap are 2.5 cm (1’’) X 152 cm (60’’). Thread the strap through the strap slot found on the back of the camera. installation Wrap the strap around the tree then press and hold down the latch.
transferring files to a computer / 13 TRANSFERRING FILES TO A COMPUTER • • • • Turn OFF the camera. Remove the SD card from the camera. Insert the SD card into the alotted slot on your computer, or use a SD card USB adapter. The computer will dectect the SD card. on a pc on a mac Click “My Computer” or “This PC” on your desktop. Click the "Finder" icon in the "Dock". Locate your device under “Removable Disk" then click to access it.
accessories available / 14 12V rechargeable Battery, Charer and housing kit Cable lock #KIT-12V - 12-volt 7.0 Ah rechargeable battery with a water-resistant ABS plastic case, AC charger, 3.6 m (12 ft.) power cable (#PW- 12 ft) and strap included. Compatible with all SPYPOINT products that have a 12 V outlet. #CLM-6FT - 1.85 m (6 ft.) lock cable fits all SPYPOINT cameras and security boxes. 42 led steel security box #SB-200, Steel box to secure the camera against theft.
troubleshooting / 15 Problem impossible to turn on the camera possible solutions • • • • • • • the screen of the camera turns off • • Recharge the internal battery for 24-48 hours. Check if there are batteries in the camera. Check if the batteries are correctly installed. Install the latest update (available on www.spypoint.com under the SUPPORT section). Replace the batteries or recharge the lithium battery pack. Recharge the internal battery for 24-48 hours.
warranty and repairs / 16 limited warranty repair service instructions This SPYPOINT product, designed by GG Telecom, is covered by a two (2) year limited warranty on material and workmanship starting from the original date of purchase. The electronic receipt is the client’s proof of purchase and must be presented to confirm that the warranty is applicable if service is needed. This warranty will be honored in the country of purchase only.
