User Manual

main menu
starting the camera
To turn the camera on and o, press and hold down the OK button.
Allows the user to start the camera in PHOTO, VIDEO or TIME LAPSE modes.
When a
mode is selected, the test light in front of the camera will ash for 30 seconds and a
countdown will appear on the screen, allowing the user adequate time to leave the area
without being photographed or video recorded.
detection test
Allows to test the detection system of the camera at the desired location. No photo or
video is recorded during the test. Walk past the camera, ensuring that you enter the
camera’s frame. The busy light will blink when movement is detected, indicating that a
picture would have normally been taken
. If the system does not detect any movement,
increase the detection distance using the Sensitivity option from the general settings
menu. Realigning the camera angle may also be necessary. It’s possible to take a picture
while in DETECTION TEST mode by pressing the OK button. The picture will be saved
and can be displayed using the View mode.
Viewing
Allows to view and manage photos and
videos using the camera's viewing screen.
Selected photo /
Total number of photos
The play icon indicates that this
element is a video.
The white outline indicates
which photo is selected.
main menu
Use the

and

buttons to navigate the interface and modify the selection, the OK button to conrm your selection and the BACK button to return to the previous menu .
In VIEW mode the last pictures and videos taken will appear as thumbnails on the camera
screen. Use the

and

buttons to navigate this page and press OK to view a photo in
a larger format. To cycle from one photo to the next, use the

and

buttons. Press on
the BACK button to return to thumbnail view.
When a large-format video is open, press OK to view the available options:
play
Allows you to play or pause the video on the screen (this option is
available only for videos).
zoom
Allows you to zoom in.
date and time
Allows the user to view the date and time displayed on the photo.
protect
Allows you to protect individual photo's or video's, preventing them
from being deleted when using the "Erase All" option.
erase
Allows you to erase the currently viewed photo or video.
erase all
Allows you to erase all photos and videos stored on the memory
card (with the exception of protected les.)
format
Allows to deletion of all content from the memory card, including
protected les.
exit
Allows to exit the menu and return to viewing mode.