Operation Manual

18
Settings • Camera
Date:
Allows the user to set the date as Month/Day/Year.
Time format:
(12h/24h)
Allows the user to select the time display over a period of 12 or 24 hours
on the photos. (e.g. 6:00 pm or 18:00)
Time:
Allows the user to set the time as Hour/Minute.
Stamp:
(Yes/No)
Allows the user to have date, time, temperature and moon phases printed
on the photos.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
Quality:
(Low/Medium/High)
Allows the user to set the photo resolution. The low resolution allows the
user to save space on the card and the high resolution allows the user to
get a better photo quality.
Temperature:
(°C/°F)
Allows the user to select the temperature display.
Continuous:
(Yes/No)
Allows the user to take photos or videos even if the memory card is full.
The camera will continue to record photos or videos by deleting the rst
recorded les.
Power:
(Batteries/Electricity)
Allows the user to select the type of power supply.
Choose "Electricity" if the camera is powered by a main electric power
supply (using a 12-volt DC adapter, #AD-12V, sold separately (p.34).
A main electric power supply is recommended when camera is used for
security purposes. It provides an instant trigger time when a movement is
detected. The lithium battery pack and the AA batteries can remain safely
inside the camera and it is ideal for blackouts. A 12-volt DC adapter that
can provide a minimum of 800 mA is required (p.34).
Note: When using a main electric power supply, the MULTI-SHOT mode
and the DELAY option are disabled as the camera triggers instantly every
time it detects motion. Also, the printing of the temperature on each
photo is disabled.
Infrared:
(On/One LED/Off)
Allows the user to choose the desired infrared lighting.
On: All LEDs work when taking photos or videos at night.
One LED: Only a single LED works
(see gure). This option can be use-
ful when using an IR-Booster/Invisible
LEDs IR-Booster (sold separately,
p.35).
Off: LEDs are deactivated so your night photos or videos are black.
LED for
infrared
sensor