User Manual

6
EXTERNAL POWER SOURCE FOR EXTENDED USE
While using the camera, an external power source can be used to provide
continuous power and allow a longer autonomy period. All of the power
sources shown can be used to power the camera continuously during use.
INSERTING THE MICROSD CARD
Insert a microSD memory card in the card slot, gold contacts facing the
front of the XCEL. The card is inserted correctly when a click is heard.
REMOVING THE MICROSD CARD
Lightly press the memory card into the camera once to pop it out of the slot
and remove it.
Power & Memory card
CHARGING THE CAMERA
The camera can be charged with:
1. A wall socket by using the USB power adaptor
2. A USB power source (e.g. a computer)
To charge the battery:
1. Connect the camera to a USB power source.
(Charging time: 4 hours)
USING THE CAMERA WHILE CHARGING THE BATTERY
While charging, it is possible to take videos and photos and access the setup
menu.
MEMORY CARD
A memory card is required to record photos and videos. The camera is
compatible with SD/SDHC memory cards, up to 32 GB capacity (sold
separately).
Before inserting or removing a memory card, always turn o the camera to
prevent loss or damage of the photos already recorded. Also make sure that
the switch on the side of the card is not in the LOCK position.
We suggest to format your SD card if it's been in another electronic
device to make sure you will have the maximum capacity of your
memory card.