Manualshelf

User Guide

ManualsBrandsSPYTEC ManualsCar & Vehicle ElectronicsSpy Tec G1WH Full HD 1080P H.264 Car DVR Camera Recorder Dashboard Cam| Black.
12345678910
changes in lighting. In Daylight mode, settings will allow greater clarity for footage taken in
daylight as with Cloudy settings for cloudy conditions. The Tungsten mode is best for basic
indoor use, whereas the Flourescent setting adds brightness and warmth to the indoor
image. Once the desired option is highlighted, press the Capture button to save the
selection.
Color
To change the color of images, select the Color option and use the Up and Down arrow
buttons to the left of the screen to choose Normal, Black and White, or Sepia (reddish brown
effect). Press the Capture button to finalize the selection.
ISO
The ISO settings allow for greater or lesser allowance of incoming light and may be
accessed by selecting ISO from the menu. In certain lighting conditions, a higher ISO
setting may create undesirable noise. Select either Auto, 100, 200 or 400 and press the
Capture button to save changes.
Exposure
The exposure settings allow you to adjust the picture quality by enabling a certain amount
of light to pass through a unit area of the lens. By adding more value, the greater the
amount of light to pass through the camera as it is filming or taking still photos and
likewise, the lesser the value will give lesser light to the capture. Settings may be set higher
for nighttime to reduce glare and lower for daytime to get similar results. Settings for
exposure are as follows: -2.0, -1.0, -1/3, -2/3, -4/3, -5/3, +0.0, +5/3, +4/3, +2/3, +1/3, +1.0
and +2.0. To adjust exposure, select the Exposure option from the Menu and navigate using
the Up and Down buttons to the left of the screen to select On or Off and press the Capture
button.
Anti-Shaking
The Anti-Shaking settings allow for image stabilization when physical interference occurs.
Select either On or Off and press the Capture button to save changes.
HDR
This setting is not accessible.
Date Stamp
The date stamp may be enabled or disabled by selecting Date Stamp from the menu. Select
either On or Off and press the Capture button to save changes.
Still Capture Settings Menu