User Guide

Components
Camera with rechargeable battery
USB cable
Car charging unit
Suction holder
User Manual
Features
1080P HD Video & Audio Recording
Up to 64GB microSD
Novatek NT96650 & Aptina AR0330
G-Sensor (allows camera to stabilize if jarred and prevents loop recording over footage
taken during an accident)
2.7" screen
Lightweight
140 degree wide angle
Tilting suction mount
Loop Recording
Functions as a regular camera or dash camera
Powering Up the Device
Plug the USB cable into the back of the dash cam device via the small USB port and attach
the cord to the external power supply via the larger USB port (computer or adapter) or use
the car charger.
You may allow the device to charge until fully charged and begin programming when
finished -or- as the device charges, press the power button and wait for the screen to
appear lit.
When fully charged as indicated by the battery icon to the bottom right on the dash cam
device screen, you may remove the device from the charger and/or continue using the direct
power source. If using battery power alone, the battery icon will have a diminishing fill
eventually resulting in an empty outline indicating a low battery.